Axis magwell adapters...

[chronoblip]

Have seen 3D printed AICS "bottom metal", but wondered if folks have seen or been interested in anything else?

I've wondered, for example, why Savage doesn't have anything STANAG compatible like Ruger or Mossberg.

Also have a project of my own where I will adapt the PPS-43 magazine.

So, if adapters were available, what kinds of magazines would folks like for their Axis?

 

[ONE-TEN]

AICS Mags. And they are available! By way of bottom metal conversion like this.
https://mcidefense.com/product/aicssavaxsa/#

Or a Chassis as this.
https://www.joeboboutfitters.com/MD...e-AXIS-Short-Action-Rifl-p/mdt-104226-blk.htm

 

[CFJunkie]

Agree with ONE-TEN.
I have found AICS Mags to be effective in Savage actions and I used MDT chassis changes to make the conversion.

The mags are very reliable and the chassis rigidity and adjustments, especially the extensions to add pull length are very effective.

 

[ONE-TEN]

Only mag I use for centerfire rifles. (Not including AR or AK)

 

[mattri]

Interesting, I've been seeing some FTF issues with a 300BO may have to look into this.

 

[ONE-TEN]

Interesting, I've been seeing some FTF issues with a 300BO may have to look into this.

Failing to feed mattri? In an Axis or 110? Is the round jamming or is it jumping the mag & bolt head, and laying loose in the Action?

 

[mattri]

Axis. Was originally a 223 all I've done is screw on a new barrel. During load development I'm shooting off a bench and single feeding so now that that's over I need to look at the intermittent feeding issue. May be as simple as how I'm running the bolt haven't had time to really look at it yet- will start a new thread when I have more info/better questions.